Termoprén 99 ZAL

Brief characteristics:
Termoprén 99 ZAL is a contact toluene free solvent type glue based on chloprene rubber that is intended for gluying the kinds of material with the non-porous surface with the increased temperature resistance of the join up to 115°C, short term up to 150°C. The glue is of beige colour.

Properties:

Service instructions:
Termoprén 99 ZAL glue is applied on each kind of material only once and it is either by spatula, spraying gun or brush. The glue to be given a thorough stir before the application. A thin layer of the adhesive is applied on each clean grease-free kind of the material (it is recommended to rough the smooth areas), it is left to get cured and the surfaces are bonded after that. The glued joint is recommended to be burden or press-in. The glued joint can be stressed mechanically till after 24 hours after the gluing. The optimal conditions for gluing are under the temperature of 20°C. The gelling action can occur under the temperatures lower than 5°C. The adhesive cannot be used in this condition. The original consistency can be achieved by the gradual tempering in the room under the temperature of approximately 25°C. During the tempering the glue should be stirred for several times. After tempering the glue. After tempering the glue wil have its original physical- mechanical properties. Do not temper by the direct heating!Under the temperatures below 0°C it coagulates irreversibly and its gluing ability cannot be revived.

Cleaning:
The tool used can be cleaned by Alkaprén^®ZAL diluent. In the case of the contamination of the hands the use of the abrasive cleaning paste e.g. SOLVIT etc. is recommended.

Storage:
Termoprén 99 ZAL is stored in the original packs in the area intended for the storage of ignitron matters that are in accordance with the provisions of CSN 650201 standard ‘Flammable liquids, plants and stores‘‘. The temperature in the room can oscilate from +10°C up to + 25°C.

Packaging:
Obaly o obsahu 21 kg (25 l), nebo podle dohody s odběratelem.

Záruka:
Packs with the content of 21 kg (25 l) or based on the arrangement with the buyer.

Safety and health protection:
Termoprén 99 ZAL is a flammable liquid. When working with Temoprén 99 ZAL it is necessary to follow the provisions of safety and health protection during the work that are mentioned in the Safety data sheet of the product.

Warranty:
The quality of Termoprén 99 ZAL glueis guaranteed by the producer for the period of 24 months from the first opening provided the storing conditions are kept.

Warning:
The products are tested by our laboratories for keeping of properties described in technical standards. If other appliances or methods of measurements are used, different results can be obtained. Also if it is to be used in another way or for another purpose than determined here, the method of application has to be tested directly at the workplace under the conditions that are typical. For these joints the strength and durability cannot be guaranteed by the producer. You can find a total survey on our extensive program from our websites. Our technicians are available to solve the special problems together with you. After this technican leaflet is published, no older is valid.

Send enquiry

Name:

Phone:

E-mail:

Your enquiry:

Termopren 99 ZAL - doccumentation (75,54 kB  PDF)

MAFIX 4 PMMA

Mafix 4 PMMA is a professional crystallic quick drying glue 1-10 minutes, intended for gluing plexiglass and profiles in the advertising, plastic makig, furniture making, automotive and electrotechnical industry. Plexi glass (PMMA), rods, pipes, signboards etc.

more

---

MAFIX BOND ACP - POLYURETHANE ADHESIVE ELASTIC WHITE 35

POLYURETHANE ADHESIVE ELASTIC WHITE 35 is SI-PU 1K adhesive for: - ACP BOND system - Aluminium composit - Metal - Wooden constructions - Stone - Concrete - Advertising industry - PRIMER MA-1, MA-2, use of PRIMER see technical data

more

---

MAFIX BOND ACP - POLYURETHANE ADHESIVE GREY 60

POLYURETHANE ADHESIVE GREY 60 is SI-PU 1K adhesive for: - ACP BOND system - Aluminium composit - Metal - Wooden constructions - Stone - Concrete - PU anchor - Advertising industry - PRIMER MA-1, MA-2, use of PRIMER see technical data

more

---

MAFIX BOND SI-ST 35 CRYSTAL

Mafix BOND SI-ST 35 CRYSTAL is a hybrid sealant crystalic clear, transparent with the high adhesion intended for gluing and sealing of polycarbonate, glass, mirrors, metals, concrete, wood, most of plastics etc. It is very resistant against the humidity, ageing and UV radiatoion, for exterior and interior applications, it can be painted over.

more

---

MAFIX BOND SI-ST 70 WHITE

Mafix BOND SI-ST 70 WHITE is a hybrid adhesive with the high adhesion intended for assembly and construction gluing of polycarbonate, glass, mirrors, metals, concrete, plasterboard, most of plastics, wood facing and insulation panels, skirtboards etc. It is very resistant against the humidity, ageing and UV radiation, for exterior and interior applications, it can be ground and painted over and it is chemically neutral.

more

---

MAFIX super glue

Super glue - wood, metal, glass, rubber, plastics and other materials.

more

---

MAFIX PVC CLEANER 20

MAFIX PVC CLEANER 20 is a mixture of alcohols and aromatic hydrocarbons designed for cleaning before and after bonding. MAFIX PVC CLEANER 20 contains anti-static additive that protects the surface against quick polution. MAFIX PVC CLEANER 20 is used berofe application of the glue and for cleaning after bonding. MAFIX PVC CLEANER 20 is especially good for cleaning of the surface from dust, residues of the protection foil, strong pencils. MAFIX PVC CLENAER 20 affects well various synthetic surfaces in combination with antistatic additives, very good application for exhibition and advertisement construction.

more

---

MAFIX 2 MCL

MAFIX 2 MCL is cleaner, posiibly glue for PMMA. 1. Glueing of pmma-pmma, eventually hardened PVC. 2. Cleaner of residues of PMMA MAFIX glues

more

---